Alcohol Infusions vs Flavoured Syrups vs Juices

An interesting idea I have been playing around with recently is how to add various flavours to cocktails. There are 3 main methods that each accomplish the same task but have vastly different elements. The most common is juice which imparts a direct fresh flavours and can come in many forms. The next is flavoured syrups which use sugar and water to extract flavor and easily add it to a drink. The last is alcohol infusions which uses ethanol as a solvent to extract maximum flavor and elevate any cocktail. 

Looking at these methods they may seem similar but in reality they each hold their own secret. Juices are the most direct where typically fruit juices are extracted and added directly to a cocktail. The main con is that typically these are delicate and degrade fairly quickly through oxidation. This can be most easily experienced by looking at freshly squeezed lemon juice vs lemon juice squeezed the previous day. When done right adding juices is un-paralleled but this isn’t easy to do in a home bar where you aren’t producing a large volume of drinks. The other main downfall is that juices dilute. If you are looking for a target abv it is exceedingly difficult to balance both flavor and abv which ultimately leads to compromise. (side note not all juices are created equal, lemon juice is very strong and potent while watermelon juice pretty much tastes like water).

This brings us to the second method: flavoured syrups. These are a bit hit or miss and could be covered by a book on its own. There a multiple methods of making them such as oelic extractions (extracting lemon oils with sugar), steeped extractions (steeping herbs in a sugar water bath and flavoured extractions where flavor concentrates are added to a sugar syrup. For now I’ll have these all under one umbrella but they truly do vary heavily. These benefit from the fact that most drinks typically add a sweetening agent so adding a flavoured syrup doesn’t affect the drink ratios and does not lead to excessive dilution while providing additional flavor. Another benefit is that many flavors taste different based on sugar content. Pure strawberry extract is actually fairly bitter and only opens up once you add some sweetness. The downsides are that flavoured syrups take a fair bit of prep work and do go bad so once again in a low volume home bar it is not feasible to have many flavoured syrups.

The third main method, alcohol infusions, take a more chemistry based approach. The industry term for this would be a solvent extraction with ethanol (drinking alcohol) being the solvent. This method is arguably the best for extracting flavor since ethanol has some non-polarity to it allowing it to better extract organic compounds which most flavor molecules tend to be. Another pro is that this method can be used with a variety of spirits leading to very customizable results. This ultimately means that the final cocktail will remain undiluted but will have maximum flavor. The con is that the term “flavor” is very loose. Alcohol has a tendency to extract everything, including both pleasant favourable compounds as well as astringent or bitter flavors as well. One method I have been playing around with is a double steep process where the compound being extracted is first extracted with a different solvent (hot water for example) and then extracted with alcohol. The main technical theory behind this is that every compound (solute) has some solubility in a particular solvent and concentration. If unwanted components are first removed with one solvent the remaining selected solutes can be extracted with alcohol. This blurs the line between art and science but the effects justify all the work and the product speaks for itself. I know there are plenty of pre-made infusions available in store but nothing will ever match the control or customizability of a home made infusion. The other main benefit, and the most important one to me is that alcohol infusions are shelf stable and so a wide variety can be made and kept in a bar for a long time (technically they do degrade but the shelf life is not comparable to fresh juices or sugar syrups) 

This has been a bit of a rant but to me it’s incredibly interesting the amount of different ways there are to flavor a drink and the variability between each. I know that for a bulk of this text I have been referring to only 3 methods but there are many more each with their own benefits (fat washing for example) and the journey definitely does not end there. Ultimately it comes down to the chef which method to use for the drink and that is the most important thing for me. 

Home Water Pressure

I have recently been on a quest to find the water pressure in my house for a reverse osmosis project I have been working on. This has proven quite difficult as the city doesn’t publish their values and pressure would obviously vary throughout the city based on elevation and not only that vary in the house itself depending on the floor and pressure drop.

For the sake of my own curiosity I got a pressure gauge and measured the water pressure in my basement with no usage in the house (no flow). I got a reading of 90psi but I will be investigating this further as I have a suspicion that water pressure changes over the day and year based on water usage in the city.

Japanese A5 Waygu

I recently had the opportunity to make some Japanese A5 waygu for a celebration. I cooked these on a cast iron plate over a wood fired grill. In total it was 3 ribeye and 2 strips all of which were to die for. Textually the meet was practically falling apart and the flavour was out of the world. A phenomenal experience and recommended for everyone to try once.

Braised Beef Shank with Polenta

A fall/winter classic that warms you up on a cold day and is a perfect dish for this time of the year. No real variations on the recipe a slow braised cut of beef pairs perfectly with polenta and then a light salad to balance it out.

Aperol Spritz

Following my trip to Italy I have been craving Aperol spritz as it truly is a perfect drink for a hot summer day. The recipe is not overly complex but I do like a particular variation with a sugar cube placed at the bottom of the glass as it both adds flavor and provides a nucleation point for the Prosecco.

Vodka Infusions

Vodka infusions are exceedingly simple and provide a great way to elevate a cocktail. The premise is simple, you use ethanol as a solvent to extract whatever flavor you want. I made 4 different infusions: chamomile, strawberry, pineapple and lemongrass. I have had improved results by using dried fruits as the end product is not diluted and I find I get faster infusions.

Measuring Furnace/AC Efficiency and Preempting Failures

One of the ways to measure furnace efficiency/life is by measuring “temperature rise” (https://hvacrschool.com/furnace-air-temperature-rise/ ) which is effectively the temperature difference between the furnace inlet and furnace exhaust. A temperature rise too low or too high can indicate issues with the furnace and monitoring this can prevent very expensive repairs.

Rather than manually testing this every X months I decided this would be a cool project to automate and set alerts for if the temperature rise ever deteriorates. I bought a couple thermocouples and wired them up to a spare NodeMcu so that I could create a wireless data logger. One thermocouple was put into the exhaust and the other plugged into the inlet. Once implemented I was able to see a 25°c temperature rise which is inline for my furnace model. Next steps are setting up automatic alerts if the temperature difference starts trending out.

This is akin to process control where rather than run equipment to failure we find the key variables (indicators) and proactively measure them to preempt any failure. In a home settings this is relatively benign but in a large manufacturing setting, a fouled heat exchanger that is unable to raise the temperature high enough can cause millions in losses.

Thermocouples plugged into air inlet and exhaust
Temperature trend between the 2 thermocouples
This is the nodemcu with the 2 thermocouples. I used a spare PCB but since the contacts on the back are exposed I had to put this in a little plastic project box so nothing shorts.
This is the trend for the temperature difference between the 2 probes.

Why Your Garden Sucks and N P K

It can be said that most of us wouldn’t be alive here on earth without the invention and production of synthetic fertilizers. Though it has been a bit taboo in current culture, fertilizers have a significant impact on crop growth and for the normal individual an answer to the questions “why does my garden suck”.

The problem most individuals have (and I think this speaks to a more general theme in life) is that they don’t measure/monitor their soil health and pH. Test kits can be purchased for ~5$ and they measure pH, nitrogen, phosphorus and potash which are all vital to having your plants thrive.

I did a test for a couple of my large grow barrels that have been neglected for a bit and got very low levels across the board with low N (nitrogen), K (potash) and P (phosphorus). To boost the soil nutrients I add a general 10-10-10 fertilizer where each number refers to its N-P-K content.

Baked Whitefish

Not much of a recipe, just a couple notes. Got this from a colleague who is an avid fisherman, the fish tasted great but cleaning and preparing the fish was a fair bit of work and makes you appreciate the convenience of supermarkets.

Beef Short Rib With Butternut Squash Risotto

This is another recipe that is just perfect for a cold winter day. Very hearty and just cures the winter blues.

The beef short rib is fall of the bone tender and the butternut squash risotto is just a perfect fit for a hearty cold winter day.